MATRIX SWITCHERS
At AVPro we carry matrix switchers for every application, and we set ourselves apart by offering built-in, unique features like...
- Test Pattern Generation
- Full Audio Routing & Matrix
- Downscaling
- EDID Management
- Drivers for all Major Control Systems
- Built-in Downmixing (AXION 4 & AXION 8 only)
- In-House Engineering & Manufacturing
- The AVPro Edge User Interface
- Front Panel access for various functions such as DHCP, Network Info, Reset, and EDID Management
See our matrix family below to see what switch will fit for your next install.
8K MATRIX SWITCHERS
Simply stated, the AVPro Edge AC-MX-88X is a classic transformed into an icon. Our engineers focused on reimagining the venerable AC-MX-88, boosting bandwidth to an ultra-wide 40Gbps with 8K input and output stages.
The AC-MX-42X is a four input by dual output HDMI matrix switcher. It supports HDMI 2.1, HDCP 2.3, and up to 8K video resolution with 40Gbps bandwidth capacity. This matrix switcher is perfect for working with the latest gaming consoles, streaming devices, and satellite receivers, connecting them to 8K TVs and projectors.
HDMI MATRIX SWITCHERS
The AC-MX-42 is ideal for bypassing AVRs that do not support full 18Gbps. Instead of bottlenecking video quality through a legacy audio device that can’t handle the signal.
The AC-MX-82RM is ideal for bypassing AVR's that do not support full 18Gbps. You can bypass uncompressed HDMI to the display while running down-scaled video into a legacy AVR. Only video is reduced and audio remains untouched, making it an ideal component for systems where high bit-rate audio is critical.
These 18Gbps 4K60 (4:4:4) 4x4 and 8x8 matrix switchers feature Toslink audio outputs, built-in scalers, on-board audio delay control, and support up to Dolby Audio™ 7.1, DTS® & LPCM. A full built-in audio matrix allows you to move the audio signal independently from the video signal at any of the de-embedded audio outputs. Audio delay is also ‘on-board’ so you can manage lip-sync issues before they become a problem. Full EDID management also allows maximum flexibility with today’s wide range of sources and displays.
A true high bandwidth powerhouse supporting the full HDMI 2.0 specification and every flavor of HDR, this matrix will ensure you can get the most out of any system. This unit supports uncompressed HDR formats, all of which are supported in up to 4K 60Hz and up to 12-bit Deep Color.
HDBaseT MATRIX SWITCHERS
These 18Gbps 4K60 (4:4:4) 8x8 and 4x4 HDBaseT matrix switchers with ICT feature uncompressed mirrored HDMI, IR routing, RS-232 signal management, scaling and audio matrixing and delay. Each output block on these powerhouse HDBaseT matrix switchers contain both a mirrored HDMI and HDBaseT port capable of handling full 18Gbps video signals with HDR metadata, HDMI 2.0, and HDCP 2.2.
ConferX MATRIX SWITCHERS
The ConferX 4x2 and 6x2 matrix switchers are ideal for any conference room, classroom, or huddle space. These 4K switchers can display four or six sources through the HDBaseT and HDMI output port, each entirely independent of the other, allowing to show two sources simultaneously. In addition, you will have no problems working with a microphone or intercom system with additional audio inputs and outputs.
With two HDBaseT inputs, this switch works smoothly alongside two directly connected ConferX Wall Plate Transmitters. You can have HDMI, VGA or USB-C inputs up to 100 meters from the AC-CX-84. With the Quick Switch feature, these remote sources still switch simultaneously as a local HDMI source, keeping your system running smoothly. This allows a teacher or presenter to use their laptop directly at the podium or presenter’s station without connecting anything to the matrix switcher. The AC-CX-84 gives any end user a simplified experience for sharing their ideas inside a classroom, conference room or huddle space.
4K 4x1 Multi-viewer
From a single HDMI 2.0 output, the AVPro Edge AC-MV-41 Multi-View video processor simultaneously displays as many as four separate sources on any size monitor, television, or projector. This versatile Multi-Viewer/Tiler may be used stand-alone, enabling four directly connected sources to be viewed as a composite image, video wall style, or independently full-size, with input switching controlled by most third-party overcontrol systems. Recallable presets may feature all inputs equally in a traditional quad view or customized to highlight one source in a larger window, with others tiled in an endless variety of patterned layouts.
