2CH Dante Amplifier

Description

The AC-DANTE-AMP-2CH is a combination 25W/RMS (@4 Ω, 12.5 W/RMS @ 8 Ω ) 2-channel local audio power amplifier and Dante Audio/AES67 decoder, supporting sampling rates of 44.1kHz, 48kHz, 88.2kHz, and 96kHz with 16-, 24-, and 32-bit word lengths encoded as either the Dante audio or AES67 format. Encrypted Dante audio information is input via the designated Dante Audio network RJ45 network port, undergoes decoding from Dante digital into analog, and outputs a speaker-level signal from a pair of secured, 2-pin terminal block connectors, plus line-level audio by way of a 5-pin terminal block connector.

Utilizing Audinate’s newest Ultimo chip, the AC-DANTE-AMP-2CH is designed to accommodate two Dante plug-and-play audio flows with very low latency and microsecond synchronization. Line-out cascades the signal to additional analog amplifiers from a single Dante endpoint. Flexible placement options are made possible by the compact, thin profile footprint. 

A mini-OLED screen provides status information for the model, firmware version, LAN IP address, DANTE IP address, and the volume setting the unit is currently set at. The display may be configured to remain off when discrete operation is desired. TCP/IP and RS-232 controls allow for remote API changes, including muting, volume lock, and balance adjustments.

Whether for an impromptu temporary setup or to address a last-minute project add-on, the versatile AC-DANTE-AMP-2CH is a valuable resource for integrators working with DANTE audio.   

2CH Dante Amplifier

Product form

  • 25 watts per channel
  • Decodes Dante & AES67 Audio
  • Compact Form Factor
  • API may be controlled by LAN or RS-232

SKU: AC-DANTE-AMP-2CH

  • Shipped today? Order within: Nov 21, 2024 13:00:00 -0600

Description

The AC-DANTE-AMP-2CH is a combination 25W/RMS (@4 Ω, 12.5 W/RMS @ 8 Ω ) 2-channel local audio power amplifier and Dante Audio/AES67 decoder, supporting sampling rates of 44.1kHz, 48kHz, 88.2kHz, and 96kHz with 16-, 24-, and 32-bit word lengths encoded as either the Dante audio or AES67 format. Encrypted Dante audio information is input via the designated Dante Audio network RJ45 network port, undergoes decoding from Dante digital into analog, and outputs a speaker-level signal from a pair of secured, 2-pin terminal block connectors, plus line-level audio by way of a 5-pin terminal block connector.

Utilizing Audinate’s newest Ultimo chip, the AC-DANTE-AMP-2CH is designed to accommodate two Dante plug-and-play audio flows with very low latency and microsecond synchronization. Line-out cascades the signal to additional analog amplifiers from a single Dante endpoint. Flexible placement options are made possible by the compact, thin profile footprint. 

A mini-OLED screen provides status information for the model, firmware version, LAN IP address, DANTE IP address, and the volume setting the unit is currently set at. The display may be configured to remain off when discrete operation is desired. TCP/IP and RS-232 controls allow for remote API changes, including muting, volume lock, and balance adjustments.

Whether for an impromptu temporary setup or to address a last-minute project add-on, the versatile AC-DANTE-AMP-2CH is a valuable resource for integrators working with DANTE audio.   

  • Key Benefits
  • Specs
  • Resources
  • In the Box

Dante – As a Dante-compatible audio device, the AC-DANTE-AMP-2CH may be used to amplify   

speakers in systems from any manufacturer’s products encoding and processing Dante Audio streams.  

 

Mini OLED Screen – Once connected, the OLED screen allows techs to verify volume levels are correctly set for the speaker-level and line-level outputs. The display provides real-time feedback for changes made on the unit or remotely via the API.  

 

Small Chassis – Supplied brackets and the small chassis form factor enable discrete, rack-free mounting for the AC-DANTE-AMP-2CH. 

 

Simple Settings – 4 dipswitch settings configure the unit for set-and-forget installation or enable volume for the unit to be remotely adjusted.  

 

Locking Power Connector – Prevents the unit from falling offline in installations where vibration may be present. 

 

10-year Warranty – The AC-DANTE-AMP-2CH is fully covered by the industry-leading AVPro Edge hassle-free, no BS 10-year warranty. 

Audio:
Dante Flows2
Line Level Output1 VRMS (balanced) maximum output, 1.5 VRMS (balanced) with 3 dB boost active
Speaker Level Output

2x25WRMS Stereo Speaker Level Outputs

Rated 25WRMS maximum @ 0dBFS, 4Ω load

Ports:
Ethernet

1x Dante network ethernet

1x Control network ethernet

Screw terminals

1x amplified speaker output

1x balanced line level output

RS232For device control only
Distance:
EthernetStandard ethernet network distances
Environmental:
Operating Temperature23 to 125°F (-5 to 51°C)
Storage Temperature-4 to 140°F (-20 to 60°C)
Operating Humidity5-90% RH (No Condensation)
Power:
Max Power Consumption100W
Power Supply Unit24V 5A
Dimensions:
MountingWall/furniture mount ears included
Dimensions (Unit only Width/Depth/Height)cm: 14 x 9 x 3.5
inch: 5.51 x 3.54 x 1.38
Dimensions (Package)

cm: 31 x 18 x 5.5 

inch: 12.2 x 7.08 x 2.17

Weight (Unit)444g (15.6oz / 0.98 lbs)
Weight (Packaged)1.174kg (2.59 lbs)
RegulatoryFCC, CE
Product WarrantyStandard 10 Year
*Specifications subject to change without notice.  Mass & dimensions are approximate
  • (1x) AC-DANTE-AMP-2CH
  • (1x) 24V-5.0A Power Supply
  • (1x) 3-Pin Terminal Block Connector for RS-232 Port
  • (1x) 5-Pin Terminal Block Connector for Line Level Output
  • (2x) Secured, 2-Pin Speaker Terminal Block Connection
  • (2x) Mounting Brackets
  • (4x) Mounting Screws

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
​For more information, go to www.P65Warnings.ca.gov.

Recently viewed products

Login

Forgot your password? Get Online Access (authorized dealers only)

Interested in learning more?
Request for Information
Consultants